Handpiece NSK


High speed air turbine handpiece


contra edge handpiece

nsk surgic expert

low speed handpiece

nsk extreme xl 210

nsk handpiece cost

acrylic cutting pods

micromotor dental nsk

dental handpiece cost

careful handpiece oral medical procedure

nsk sg20

nsk america enterprise

straight handpiece pods

nsk handpiece parts

nsk rotating

nsk 45 degree careful handpiece

straight handpiece employments

nsk handpiece upkeep

nsk embed engine cost

nsk rapid handpiece costs

nsk careful straight handpiece

nsk handpieces australia

nsk handpiece sequential number

nsk dental authority site

nsk sga-e2s

nsk primado 2 cost

nsk oral medical procedure handpieces

straight handpiece with water system

6 in stock

Add to Wishlist
Add to Wishlist



The handpiece Nsk itself consists of internal mechanical components that initiate a rotational force and provide power to the cutting instrument, usually a dental burr. The type of apparatus used clinically will vary depending on the required function dictated by the dental procedure. It is common for a light source and cooling water-spray system to also be incorporated into certain handpieces. In a clinical setting, however, air turbine handpieces are most often referred to as “high-speeds”. When dentists drill into teeth, they are shaping an opening. Place a few drops of lubricant into the drive air hole of the handpiece Nsk. And run the handpiece on slow speed until the only lubricant comes out of the head. When dentists drill into teeth, they are shaping an opening.

Current iterations can operate at up to 800,000 rpm, however, most common is a 400,000 rpm “high speed” handpiece for work. Complemented with a “low speed” handpiece operating at a speed that is dictated by a micromotor which creates the momentum (max up to 40,000 rpm) for applications requiring higher torque. When dentists drill into teeth, they are shaping an opening. This is to ensure all of the rot in the dentin is removed entirely. Dental burs are used for cutting hard tissues – tooth or bone. When a dentists drill into teeth, they are shaping an opening.

They are made of steel, stainless steel, tungsten carbide, and diamond grit. During a root canal procedure, the nerve and pulp are removed and the inside of the tooth is cleaned and sealed. When dentists drill into teeth, they are shaping an opening. When the dental unit is ceased, the soil can turn out under the gaseous tension of inertance.

More Info

Handpiece NSK High-Speed Air Turbine (Handpiece NSK PANA AIR Σ )Available in Wrench type; Push-catch type2-gap; 4-hole standard head; Torque head; Mini headphone AIR Σ Is the primary turbine that NSK propelled to the world commercial center. The turbine was among the main that highlighted capsulated cartridges and appraised high for its ground-breaking torque, low commotion, and extraordinary strength.

Additional information

Weight0.100 kg


There are no reviews yet.

Be the first to review “Handpiece NSK”

Your email address will not be published. Required fields are marked *